No.
Action
Select the newly created
interface, and press the
"Properties" button to open the
window that is displayed.
Remove the checkmark for "Set
MAC address / use ISO protocol"
and set the same network
address and subnet mask that
you assigned when setting the
20.
PC/PG interface in Section 4.2.
In the example, the following IP
address and subnet mask are
used:
192.168.0.102
255.255.255.0
Click "OK" to confirm what has
been entered.
Now change to the "Assignment"
tab to assign the interface of the
hardware being used.
21.
To do this, select the
corresponding interface
(in the example: TCP/IP -> ASIX
AX88179...) and press "Assign".
The assigned interface is now
displayed in the "Assigned"
window. Please ensure that the
checkmark for "S7ONLINE
22.
Access" is set.
Click "OK" to confirm what has
been entered.
PROFIsafe SLS Override
Version 1.0, Entry ID: 81682475
4 Configuration and project engineering
Remark
31