Chapter 1: Product Introduction
Knowing Your NISE 50-J1900
Front Panel
Antenna Hole
LEDs
Power
SIM
HDMI
Switch
Rear Panel
DC Input
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
Antenna Hole
USB 2.0
LAN
COM1/2/3
Antenna Hole
Used to install external antennas.
Power Switch
Press to power-on or power-off the system.
SIM
Used to insert a SIM card.
LED Indicators
Indicates the hard drive and GPIO (programmable) activity of the system.
HDMI
Used to connect a high-definition display.
USB 2.0
USB 2.0 ports to connect the system with USB 2.0/1.1 devices.
LAN
Used to connect the system to a local area network.
DC Input
Used to plug a DC power cord.
COM1 to COM3
Three DB9 ports used to connect serial devices.
– COM1: Full RS232 signal
– COM2: Full RS232 signal
– COM3: RS422/485 auto flow control
4
NISE 50-J1900 User Manual