Using the external fresh gas outlet with an additional switch (optional)
The changeover switch permits simple switching of
the fresh gas from the compact breathing system
(COSY) to the non-rebreathing system.
Preparation
Example: Bain non-rebreathing system
2
2
1 Connect the non-rebreathing system to the
corresponding fresh gas outlet on the switch.
2 Screw the sample line to the connections on the
breathing mask or the breathing system filter
and to the water trap on the gas monitor.
3
3 If required, connect the anesthetic gas
scavenging hose of the non-rebreathing system
to the second port of the anesthetic gas
receiving system (AGS).
1
Supplement to Instructions for Use
Follow the Instructions for Use included with the
non-rebreathing system and the anesthetic gas
receiving system (AGS).
Operation with non-rebreathing system
Fresh gas flow to the non-rebreathing system:
Set the lever on the switch to »
The lever points in the direction of the non-
rebreathing system and shows the symbol for
the non-rebreathing system.
Set the fresh gas flow according to the patient's
requirements.
Operate the non-rebreathing system according
to the corresponding Instructions for Use.
«.
15