Keysight N5231A Installation Note page 28

Configurable test set and source attenuators upgrade kit option 200 to option 216

Hide thumbs Also See for N5231A:

Installation Procedure for the Upgrade

Step 19. Prepare the PNA for the User

1. If necessary, reinstall front jumper cables.

2. Install the cable guards, pushing them over the front jumper cables until

the cushioning material touches the front panel of the PNA.

3. Install the dust caps on the test ports.

4. Clean the analyzer, as needed, using a damp cloth.

Installation Note N5232-90101

Table of Contents

N5231b N5232a N5232b N5239a N5239b