Keysight N5231A Installation Note page 23

Installation Procedure for the Upgrade
Step 16. Remove Option 200 License
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must not be running.
— A keyboard and mouse must be connected to the network analyzer.
A Model Option 200 License Removal Procedure
For B models, refer to
1. To start the option enable utility, press UTILITY
2. Click the arrow in the Select Desired Option box. A list of available options
3. In the Select Desired Option list, click 200.
4. Click Remove.
B Model Option 200 License Removal Procedure
For A models, refer to
1. To start the Keysight License Manager, press Start > Keysight License
2. Right click on the desired option.
3. In the Select Desired Option list, click 200.
4. Click Remove.
5. A message displays stating that the option removal was successful.
Step 17. Enable Options 216
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must not be running.
— Refer to the license message you received from Keysight: Verify that the
— A keyboard and mouse must be connected to the network analyzer.
Installation Note N5232-90101
"B Model Option 200 License Removal Procedure."
Option Enable
then . An option enable dialog box will appear.
will appear.
"A Model Option 200 License Removal Procedure."
Manager > Keysight License Manager . A Keysight License Manager dialog
box will appear.
analyzer's model and serial numbers match those on the license message
you received from Keysight.
Service
System , then ,
23