Installation Procedure for the Upgrade
Step 13. Install Front Panel Jumpers
As shown in
N5222-20091). Torque to 10 in-lbs.
Figure 7
Front Panel Jumper Cables Installation
Step 14. Reinstall the Inner Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the
PDF Service Guide
Step 15. Reinstall the Outer Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the
PDF Service Guide
22
Figure
7, install 6 front panel jumper cables (part number
1
.
.
1
1. See
"Downloading the Online PNA Service Guide" on page
7.
Installation Note N5232-90101