Keysight N5231A Installation Note page 14
Configurable test set and source attenuators upgrade kit option 200 to option 216
Hide thumbs
Also See for N5231A:
- Configuration manual (37 pages) ,
- Security features and document of volatility (34 pages)
Advertisement
Installation Procedure for the Upgrade
Figure 1
Source Attenuator Assembly
Step 7. Install the A29 and A30 Source Attenuator Assemblies
Refer to
on page
1. Install both source attenuator assemblies to the deck as shown, using two
Figure 2
Source Attenuators Installation
14
Figure 2
for this step of the procedure. New parts are listed in
9.
screws (0515-0372) with each assembly. Use a T-10 TORX driver set to 9
in-lbs to tighten all screws.
Table 1
Installation Note N5232-90101
Advertisement
