Ground The Front Door - Cisco 8800 Series Hardware Installation Manual

Ground the Front Door

Step 5
Repeat Steps 1–3 to install the other front door.
Ground the Front Door
Note To comply with GR-1089, you have to bond the front door to the ground port on the chassis using the ground
braid.
Procedure
Step 1 Install the grounding cable towards the side of the front door.
Step 2
Apply the star ring terminal end of the grounding cable to the front door. Tighten the screw to 11.5 to 15 in-lb
(1.3 to 1.7 N-m) of torque to provide proper bonding.
Figure 35: Ground Cable to Chassis
Note
Step 3
Connect the other round terminal of the grounding cable to the ground port on the side filter bracket on either
left or right side of the chassis. Tighten the M4 screw to 11.5 to 15 in-lb (1.3 to 1.7 N-m) of torque.
Step 4
Repeat Steps 1–3 to install the grounding cable to the other front door.
Step 5 Close and lock the front door.
What to do next
Continue to power on the router.
Hardware Installation Guide for Cisco 8800 Series Routers
48
Fasten the ground straps on both the doors to the chassis.
Unpack and Install the Chassis