Table of Contents
Advertisement
Unpack and Install the Chassis
Figure 26: Bottom Cover for 8608 Chassis
1
2
Step 3
Secure the bottom cover to the door brackets by using four M4 x 6 mm pan-head Phillips screws. Tighten
each screw to 11.5 to 15 in-lb (1.3 to 1.7 N·m) of torque.
Step 4
Tighten the door brackets screws to 11.5 to 15 in-lb (1.3 to 1.7Nm) of torque after completing the bottom
cover installation.
Attach Front Door to Chassis
Procedure
Step 1
On the back side (open side) of one door, pull in on two protruding spring pins so that the pins are held inside
the door frame.
Bottom cover
M4 x 6 mm pan-head Phillips screws
Hardware Installation Guide for Cisco 8600 Series Routers
Attach Front Door to Chassis
41
Advertisement
Table of Contents
