Locate And Ground The Chassis - Cisco 8800 Series Hardware Installation Manual

Unpack and Install the Chassis
Figure 18: Attach 8812 Chassis to Rack - Rear Mounting Bracket
1
Step 5 Use the screws provided with the rack to attach the chassis with minimum of 6 screws for each rear rails.
What to do next
Connect the chassis to the ground at your facility.

Locate and Ground the Chassis

Procedure
Step 1
Locate the chassis grounding receptacles on your router chassis.
You can locate them at either of the following positions:
• At the lower or upper left side rear
• At the left side panel, lower section towards the rear
Rear right rack mounting 2
bracket.
Hardware Installation Guide for Cisco 8800 Series Routers
Locate and Ground the Chassis
Install screws from inside
the chassis to tighten each
screw to 30 in-lbs (3.3
N-m) of torque.
33