Remove Fan Tray; Install Fan Tray - Cisco 8800 Series Hardware Installation Manual

Replace Chassis Components

Remove Fan Tray

Remove only one fan tray at a time during router operations. If you remove more than one fan tray at a time,
the router shuts down within two minutes unless you replace the extra fan trays that you removed within that
time.
Procedure
Step 1
Unscrew the four captive screws on the front of the fan tray until each screw is free of the chassis.
Step 2 Hold both handles on the front of the fan tray with both of your hands and pull the fan tray out of the slot.
Step 3
Set the fan tray on antistatic material or inside an antistatic bag.

Install Fan Tray

Before you begin
• Fan tray slot is open in the chassis.
• If you are replacing a fabric card behind the open fan tray slot, ensure that the fabric card replacement
Procedure
Step 1
Use both of your hands to hold the two handles on the front of the fan tray that you are installing.
operation is completed.
Hardware Installation Guide for Cisco 8800 Series Routers
Remove Fan Tray
91