Assign Inputs And Outputs; Settings - Siemens Synco 200 SEZ220 Documentation On Basics

Activate function block
Configuration
Setting values
Display values
Wiring test
32 / 46
Siemens
Building Technologies
Connections and functions,
AO 2 inverted
MAXPOS2
MINPOS2
8.2

Assign inputs and outputs

The function block is activated through the following assignments:
• Input IN X, and
• At least 1 of the 2 outputs AO x.
You can define the measuring or value range of IN X when configuring the
associated input Xx (see Section 5).
8.3

Settings

COMMIS > CONF > 2X-INV
Path:
Display Name
IN X Preselection external
AO 1 Modulating output 1
AO 2 Modulating output 2
... > PARA > 2X-INV
Path:
Display Name
MINPOS1 Dew point
MAXPOS1 Positioning signal max 1
MINVAL1 Value low 1
MAXVAL1 Value high 1
INVERS1 Inversion 1
MINPOS2 Positioning signal min 2
MAXPOS2 Positioning signal max 2
MINVAL2 Value low 2
MAXVAL2 Value high 2
INVERS2 Inversion 2
INFO
Path:
Display Name
AO 1 Modulating output 1
AO 2 Modulating output 2
COMMIS > TEST
Path:
Display Name
AO 1 Modulating output 1
AO 2 Modulating output 2
SEZ220 signal converter
Function block 2X-INV
continued
Y [ % ]
100
0
MINVAL2 MAXVAL2
Range
0...100 %
0...100 %
−50...+9999.9
−50...+9999.9
NO, YES
0...100 %
0...100 %
−50...+9999.9
−50...+9999.9
NO, YES
x
Settings
---, X1...X5
---, Y1, Y2
---, Y1, Y2
Factory setting
0
100
0
50
NO
0
100
0
50
NO
Comments
0...100 %
0...100 %
Positions
---, 0...100 %
---, 0...100 %
CE1P5146en
02.06.2008