Fix Connector Firmware/System; Roxie W/Tpms Management - Launch X-431 User Manual

LAUNCH

3.10.5 Fix Connector Firmware/System

Use this item to upgrade and fix the diagnostic VCI firmware/system.
Note: During upgrade, do not perform other operations, switch to other interfaces, or cut off power to the VCI
device.
• If the diagnostic function is abnormal, tap or click "FIX CONNECTOR FIRMWARE" to fix it.
• If the connection between the VCI device and the diagnostic tool is abnormal, try to plug the VCI device
and power it on again. If the problem still exists, tap or click "FIX CONNECTOR SYSTEM". The fixing
process takes about 1~5 minutes. If the VCI device beeps, it indicates the process is completed.

3.10.6 ROXIE W/TPMS Management

This option is used to bind the ROXIE W device and the Pilot TPMS device to the mobile diagnostic center.
Once bound, the reports generated by the ROXIE W device and the Pilot TPMS device will be automatically
pushed to the mobile diagnostic center and reminded each time the inspection session is finished.
www.x431.com +86 755 8455 7891
Password Envelope
Fix VCI Firmware/System Screen
Station
Product S/N
Activation Code
User's Guide
73