Renew Subscription; Adas; Reports; Roxie W Reports - Launch X-431 User Manual

LAUNCH

3.6.3 Renew Subscription

If the software subscription is due or expires, the system will prompt you to renew your subscription and a
"Renewal" button will appear on the bottom of the update page.
There are two ways available for you to make payment: PayPal and Subscription Renewal Card (*need to
buy it from the local dealer where you purchased the X-431 Station).
A. Using PayPal
1. Tap or click "Renewal" on the update page to navigate to the renewal type selection screen.
2. Select "PayPal", and then follow the on-screen instructions to finish the transaction.
3. After payment, go to update center to update the diagnostic software.
B. Using Subscription Renewal Card
1. Tap or click "Renewal" to navigate to the renewal type selection screen.
2. Select "Subscription Renewal Card".
3. Input the 24-digit password of Subscription Renewal Card and then tap or click "Submit" to finish the
renewal.
4. Go to the update center to update the diagnostic software.

3.7 ADAS

Advanced Driver Assistance Systems (ADAS) are electronic components in vehicles, which include a
wide range of safety features for vehicles such as autonomous emergency braking (AEB), lane departure
warning (LDW), lane keep assist, blind spot elimination, night vision cameras and adaptive lighting.
The cameras and sensors used by these systems have to be precisely calibrated and adjusted. Incorrect
calibration resulting from windscreen replacement or wheel alignment can cause the system to deliver
incorrect results or even fail completely, resulting in a serious accident or even a fatality.
The ADAS feature on this diagnostic tool is disabled by default and user needs to activate this feature with
the Activation Code (optional) before performing this function. Moreover, it also requires the diagnostic tool
to work with the X-431 ADAS PRO calibration tool manufactured by LAUNCH (calibration tools from other
manufacturers will not be supported). As a comprehensive and flexible calibration tool, the X-431 ADAS
PRO calibration tool enables you to effectively and accurately calibrate a wide range of camera-based &
radar-based driver assistance systems, e.g. the front camera for the lane departure warning system, the
radar sensor for the ACC (Adaptive Cruise Control) or the camera for adaptive headlights.
Follow the steps below to activate it.
1. Tap or click "ADAS Calibration".
2. Tap or click "Activate" to enter the ADAS activation screen. Scratch or scrap the designated area on the
Activation Card to reveal the password, and input the 24-digit password to activate it.
3. Now the ADAS function becomes accessible and is ready for use.

3.8 Reports

This module allows you to view and manage all kinds of reports or recorded data. Additionally, it also
provides users with the ability to freely combine multiple reports (such as Health reports, ROXIE W Reports
and TPMS reports) of the same carline into one comprehensive report.

3.8.1 ROXIE W Reports

This module stores all vehicle inspection reports generated by the ROXIE W device that has been bound to
the diagnostic tool.
64
Station
User's Guide
www.x431.com +86 755 8455 7891