Launch X-431 User Manual page 55

LAUNCH
Compare Sample: Tap or click it to select the sample DS file, the values you customized and saved in
process of DS sampling will be imported into the "Standard Range"(See below) column for your comparison.
Note: Before executing this function, you have to sample the values of data stream items and save it as an
sample DS file.
Report: Saves the current data as a diagnostic report. All diagnostic reports can be accessed from "Reports"
-> "Health Report".
Record: Tap or click to start recording diagnostic data. Recorded live data can serve as valuable information
to help you in troubleshooting of vehicle problems. All diagnostic records can be replayed from "Reports" ->
"Recorded Data".
Note: The saved file follows the naming rule: It begins with vehicle type, and then the record starting time and
ends with .x431 (To differentiate between files, please configure the accurate system time).
Help: Tap or click to view the help information.
Save Sample: This item enables you to customize the standard range of live data stream items and save
it as DS sample file. Each time you run the data stream items, you can call out the corresponding sample
data to overwrite the current standard range.
Tap or click it to start recording the sample data (*Only data stream items with units will be recorded), and the
screen displays as below:
Once recording is complete, tap or click
50
Fig. L-22
Fig. L-23
to stop it and navigate to the data revision screen.
Station
User's Guide
www.x431.com +86 755 8455 7891