Launch X-431 Quick Start Manual

1. Charging & Turning On
1. Plug one end of the included power adaptor into the USB port of the handset, and then other end
into the AC outlet.
2. Once the battery is fully charged, disconnect the power adaptor from the AC outlet.
3. Press the [POWER] button on the handset
screen.
2. Wi-Fi Setup
1. Tap [Settings] on the home screen and then [WLAN] to configure Wi-Fi setting.
2. Select the desired Wi-Fi connection from the list. (Password may be required for secured
networks).
3. When "Connected" appears, it indicates that it is properly connected to the network.
3. Register and Download Software
1. Launch App: tap on the application icon on the home screen, and then tap on "Login" on the upper
right corner of the screen.
Username
Password
Retrieve password
A. If you are a new user, refer to step 2-4.
B. If you have an app account, tap on "Login" to log in the system directly.
C. If you forgot the password, tap on "Retrieve password", and then follow on-screen prompt to
retrieve it.
2. Create an App Account: Tap on "New Registration" in Figure A, input the information (items with *
must be filled) and then tap on "Register". Refer to Figure B.
3. Activate VCI Connector: Input the Product S/N and Activation Code (can be obtained from the
password envelope), and then tap on "Activate". Refer to Figure C.
4. Finish Registration: Tap on "Yes" to enter the vehicle software download screen. Refer to
Figure D. To download it later, tap on "No".
5. Download Diagnostic Software: Tap "Update" on the update page to start downloading.
Once downloading finished, the software packages will be installed automatically.
*Note: When downloading the diagnostic software or checking for updates it is important to make
sure the tool has a strong Wi-Fi connection.
Quick Start Guide
, the system starts initializing and then enters the home
Login
Login
New Registration
A
Register
1
2
Create an Account Activate VCI
Username
*
Password
*
Confirm Password
*
Email
*
Select Country
*
* CAPTCHA
CAPTCHA
Register
Register
2
1
Create an Account Activate VCI
Serial Number
*
Activation Code
*
Where is my activation code?
Activate
Register
1 2
Create an Account Activate VCI
Congratulations! You have successfully completed your registration. Do you want to download
the diagnostic software now?
No
LAUNCH
3
Finish Registration
B
3
Finish Registration
>> Skip
C
3
Finish Registration
Yes
D
EN