Launch X-431 User Manual page 67

LAUNCH
Note: Before processing remote diagnosis, please make sure the VCI device is properly connected to the
vehicle.
3. Tell the partner to input his own official technician account and password, and then tap "Login" to
navigate to the following figure.
4. Tell the partner to check the box "Serial number" and enter the Serial Number provided by you, and then
tap "Start remote diagnosis" to control your device remotely.
In process of remote diagnosis, please note the following things:
1) You are not suggested to execute any actions.
2) The partner is not allowed to save any diagnostic reports or records on your handset.
The operations in remote diagnosis are same as those in local diagnosis. Once the session is complete, a
remote diagnostic report will be automatically generated.
62
Fig. R-10
Fig. R-11
www.x431.com
Station
User's Guide
+86 755 8455 7891