Launch X-431 User Manual page 19

LAUNCH
6
7
8
OBD-16 connector
9
5V Charging port
10
11
OK
12
13
14
15
Charging LED
Pilot TPMS has the following functions and advantages:
• TPMS: Pilot TPMS provides the ability to activate most OEM/Universal TPMS sensors, and allows users
to reprogram sensor IDs, retrieve/clear TPMS DTCs and sensor relearning, helping technicians quickly
find out faulty TPMS and turn off MILs.
• Smart(Auto-Detect) Diagnosis: Once Pilot TPMS and the vehicle are properly connected, user can
manually start system auto-detect process. Once the whole process is successfully finished, a diagnostic
report will be automatically generated and sent to your email box (if bound).
• Manual Diagnosis: If Auto-Detect failure occurs, manual diagnosis is also available. Diagnosis functions
include: Version Information, Read DTCs, Clear DTCs and Read Data Stream (supports 3 display modes:
Value, Graph and Merged).
• OBDII/EOBD Diagnosis: 10 modes of OBD II test are supported, including EVAP, O2 Sensor, I/M
Readiness, MIL Status, VIN Info, and On-board monitors testing etc.
• Reset: Frequently used maintenance and reset items including Oil lamp reset, DPF regeneration,
Electronic parking brake reset, Steering angle calibration, Battery maintenance system reset, ABS
bleeding and TPMS reset can be done.
• One-click Update: Let you update your diagnostic software and APK online.
• Features screenshot. Screenshots and reports sharing are supported.
• Touch & Keypad input are supported. Quick Dial buttons enables you to easily access the corresponding
functions.
Note: For initial use, the test report generated by Pilot TPMS cannot be directly pushed to the mobile diagnostic
center. The user needs to bind the Pilot TPMS device to the X-431 Station user account first. Only after it is
successfully bound, the test report can be synchronized to the mobile diagnostic center and reminded. For specific
binding operations, please refer to Chapter "User Info".
14
Press to the home (Job menu) screen.
HOME
Move cursor up and down for selection.
/
Move cursor left or right for selection; Or turn page up and down
/
when more than one page is displayed.
To connect to vehicle's DLC (Data Link Connector) via diagnostic
cable.
To connect to external DC power for charging Pilot TPMS.
Power
Confirms a selection (or action) from a menu list.
Press it once to capture the current screen. All screenshots are
Screenshots
saved in the "Image" folder of "Data".
A quick dial to the "Diagnostic Reports" module. Alternatively, it
Diagnostic Reports
can also be accessed by "Data" -> "Diagnostic Report".
Provides detailed descriptions/tips for diagnostics.
Help
Red means Charging and Blue means Fully charged.
• In Off mode, press it for about 5 seconds to turn the handset
on.
• In On mode:
• Press it to activate the LCD if the LCD is off.
• Press it to turn off the LCD if the LCD lights up.
• Press it for 3 seconds to turn it off.
Station
User's Guide
www.x431.com +86 755 8455 7891