Launch X-431 User Manual page 47

LAUNCH
Report: Saves the diagnostic result as a report.
To save it as a diagnostic report, please proceed as follows:
1. Select the report type and fill in the vehicle information: Tap or click
option list and input the required information, and then tap or click "OK" to go to the next step.
2. Fill the shop information and technician information:
• If the Shop information was not filled before, the corresponding input fields will display blank. Input the
shop information on this pop-up window, it will be automatically generated when the diagnostic report is
saved.
Note: Alternatively you can also set it in "User Info" -> "Settings" -> "Shop Information". After you saved the
information, it will be automatically generated every time the diagnostic report is saved. All vehicle and workshop
information will be appended as tags on the diagnostic report.
• In the Technician Name field, tap or click "Add" to create a technician list (*If the technician list is already
available, tap
To ignore the workshop information, tap or click "Skip" to go to the next step.
42
directly to select it from the pull-down list) .
Fig. L-9
to select the report type from the
www.x431.com
Station
User's Guide
+86 755 8455 7891