Initial Use; Assembling The X-431 Station; Installing The Monitor - Launch X-431 User Manual

LAUNCH

2 Initial Use

2.1 Assembling the X-431 Station

2.1.1 Installing the monitor

1. After the mobile diagnostic workbench is unpacked, step down the left and right parking safety
mechanism on the rolling casters respectively to release them so that the casters can move freely.
2. After parking, use the foot to step on the parking safety mechanism to lock it. At this time, the workbench
casters are locked and cannot move freely.
3. Install the monitor hook rack in the position indicated as below.
4. Align the mounting holes on the back of the monitor with the mounting holes on the mount bracket, and
secure them with screws.
Mounting holes on the monitor
5. Locate the three cables (USB cable, HDMI cable, and DC power cord) that are pre-installed in the lifting
drag chain and plug them into the corresponding ports on the monitor body.
www.x431.com +86 755 8455 7891
(Locked)
Mounting position for monitor hook rack
Station
(Released)
Hook rack
for monitor
Mount bracket
User's Guide
17