Launch X-431 User Manual page 125

LAUNCH
For initial use, the test report generated by ROXIE W/Pilot TPMS device cannot be directly pushed to the
mobile diagnostic center. The user needs to bind the ROXIE W/Pilot TPMS device to the X-431 Station user
account first. Go to "User Info" -> "ROXIE W/TPMS Management" to bind it.
For ROXIE W devices, fill in the ROXIE W S/N and Activation Code (can be found in the Settings on the Job
Menu of ROXIE W), then tap or click "BIND".
For Pilot TPMS devices, input the Serial Number and Activation Code (can be seen on the Front Cover of
the Pilot TPMS User Manual), then tap or click "BIND".
6. How to update the APK and diagnostic software?
Note: During the update, please make sure the tool has a stable network connection.
1. Go to the Diagnose main menu screen, tap or click "Software Update".
2. To update all software, tap or click the "All software" tab and tap/click "Update" on the bottom of the
screen to start the download.
3. To update some common software, tap or click the "Common software" tab to update the previously
added common software list.
7. How to retrieve the login password?
Please follow below steps to proceed in case you forgot the login password:
1. Tap or click [Login] button on the upper right corner of the screen.
2. Tap or click "Retrieve password".
3. Input product S/N and follow the on-screen prompts to set a new password.
120
Station
User's Guide
www.x431.com +86 755 8455 7891