System Requirements
SNMP Solo requires a terminal for configuration and a network
connection with an NMS for operation. The following is a
description of all required components and a list of the most
widely used NMSs.
•
The components of your standard SNMP Solo package
•
Connection to an EtherNet network
•
An SNMP-based management station
Some NMSs that support the SNMP Solo are:
HP OpenView for UNIX
HP OpenView for Microsoft Windows
Novell NMS
SunConnect SunNet Manager
IBM NetView/6000
•
A dumb terminal or a PC with an emulation package to
configure the SNMP Solo SNMP Agent
•
An RS232 communication port on your PC or terminal
•
A UPS—any UPS type
You can interface any contact closure UPS with SNMP Solo
if you have the manufacture's specific cable supplied with
your kit.
•
Network identification values for the SNMP Solo:
IP Address
Net Mask
IP Addresses for the NMS
Definitions of Communities
IP Address of the Gateway/Router
System Requirements
Tripp Lite
7