Reset Configuration To Default; To Save And Exit; Figure 11 Reset Values To Default; Figure 12 Save And Exit Messages For Configuration - Tripp Lite SNMP Solo MT-SE-37/02 Owner's Manual

SNMP Solo
•
Location (location of your UPS and SNMP Solo)
•
List of the current communities with their access control
code
•
List of the current trap receivers with their severity level
codes

Reset Configuration to Default

If you press <6>, the program resets all fields to default. To
display the results, press <5> for Display Settings. Most fields
have no values.

Figure 11 Reset Values To Default

To Save and Exit

If you are satisfied with your configurations, save them and exit.
To save, press <7>. The screen displays the following
message:

Figure 12 Save and Exit Messages For Configuration

20 Configuration