Table of Contents
Advertisement
Tripp Lite
The top of the screen displays your new values:
Record the definitions on your Worksheet for reference. To
return to the Main Menu, type 0 and press <enter>.
Set Access Controls
To set access controls of SNMP communities from the Main
Menu, type 2 at the Choose a Number => prompt. The following
screen displays a column of four Manager IP addresses with
their access permission, the commands, and an example to
guide you. Use this screen to specify which managers have
access to the SNMP Solo agent, the community names, and
what type of access the IP managers have–read only or read
and write.
Figure 7 Access Controls
Configuration
15
Advertisement
Table of Contents
