Table of Contents
Advertisement
SNMP Solo
SunConnect SunNet Manager
Compile the Device MIB
1. Copy the UPS MIB file from the TAR formatted diskette into
the subdirectory specified by na.snmp.schemas keyword
in $SNMHOME/snm.conf.
2. Execute mib2schema on the MIBs. This creates respec-
tive *.mib.oid and *.mib.schema and *.mib.traps
files.
3. In the SNM console window, select File|Load.
4. Select Management Database.
5. Click on *.mib schema, where *= the name of each MIB
copied in step 1 and select Load.
6. Start a new shell window; change to the subdirectory
$SNMHOME/agent and execute build_oid. This creates an
oid database using all compiled MIBs.
7. Append *.mib.traps to the file specified by na.snmp-
trap.default keyword in $SNMHOME/snm.conf.
Add SNMP Solo Object to the Management Map
1.
Enter the submap where the managed device will be
placed.
Select Edit, Create, Component, lanbox with the right
2.
(opposite) mouse button. Select Create.
The Properties box displays.
3.
4.
Enter the SNMP Solo 's name as it appears in
etc/hosts or in the name server.
5.
Enter the SNMP WrCommunity.
6.
Select the desired MIBs.
7.
Choose a color for the device.
8.
Select Apply. This adds the device to the submap.
9.
Create a managed device view with the following steps:
a)
b)
c)
d)
e)
28
Configuring the NMS
Select the relevant submap .
Select Edit, Create, View, subnet with the right
(opposite) mouse button.
Select Create and press <enter>.
Enter the view name.
Copy and paste the glyph into the managed
device view.
Advertisement
Table of Contents
