Service Box Connections; Ventilation Of Non-Ventless Fryer; Ventless Hood Clearances - GILES GEF-400 Operation & Service Manual

Model: GEF-400, GEF-560, GEF-720 &
GEF-400-VH, GEF-560-VH, GEF-720-VH
2.4.2

Service Box Connections

Service Entrance Box
Terminal Blocks
Power Wires from Main
2.5

Ventilation of Non-Ventless Fryer

Note:
• Guidelines and code for ventilation system requirements may differ from locale to locale. Always con-
sult with the local authorities having jurisdiction to ensure compliance.
Consult a professional, certified ventilation specialist or HVAC company for assistance in specifying the
proper hood and/or ventilation system for this unit.
2.6 Ventless Hood Clearances (VH Model)
GEF Ventless Hood Fryers are equipped with a 3-way exhaust air diverter that directs exhaust air horizon-
tally, to the sides and rear. The minimum clearance from the top of the diverter to the ceiling is 0 inches
(0 mm), however it is recommended to allow 3 to 6 inches (76 - 152 mm) to provide clearance for moving
the unit. The area around the sides and rear of the diverter must be free of obstruction to allow proper air
flow.
10
Circuit Breaker Box
Installation