Installing A So-Dimm Memory Module; Installing An M.2 Module - Nexcom TPPC 2401 User Manual

Chapter 3: System Setup

Installing a SO-DIMM Memory Module

1. With the chassis cover removed, locate the SO-DIMM socket and insert
the module into the socket at an approximately 30 degrees angle. Push
the module down until the clips on both sides of the socket lock into
position. The clips at the ends of the socket will automatically snap into
the locked position to hold the module in place.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
Memory Module

Installing an M.2 Module

1. With the chassis cover removed, locate the M.2 socket and insert the
module into the socket at an approximately 45 degrees angle until the
gold-plated connector on the edge of the module completely disappears
into the slot.
M.2 Module
34
TPPC 2401/2701/3201 User Manual