Chipset - Nexcom TPPC 2401 User Manual

Chapter 4: BIOS Setup
Device reset time-out
Selects the USB mass storage device's start unit command timeout.
Device power-up delay
Maximum time the value will take before it properly reports itself to the Host
Controller. "Auto" uses default value: for a Root port it is 100 ms, for a Hub
port the delay is taken from Hub descriptor.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.

Chipset

This section gives you functions to configure the system based on the
specific features of the chipset. The chipset manages bus speeds and access
to system memory resources.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset
► South Bridge
► South Cluster Configuration
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
South Bridge
Enters the South Bridge submenu.
South Cluster Configuration
Enters the South Cluster Configuration submenu.
44
Security Boot Save & Exit
South Bridge Parameters
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
TPPC 2401/2701/3201 User Manual