Nexcom TPPC 2401 User Manual page 56

Chapter 4: BIOS Setup
IT8528 Super IO Configuration
This section is used to configure the serial ports of the IT8528 Super IO.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
IT8528 Super IO Configuration
Super IO Chip IT8528
Serial Port 1 Configuration

Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Super IO Chip
Displays the Super I/O chip used on the board.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
Serial Port 1 Configuration
This section is used to configure serial port 1.
Set Parameters of Serial Port
1 (COMA)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables the serial port.
41
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Device Mode [RS232]
Terminal resistor [Disabled]
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
TPPC 2401/2701/3201 User Manual