Nexcom TPPC 2401 User Manual page 57

Chapter 4: BIOS Setup
IT8528 H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
PC Health Status
: +43 °c
CPU temperature(DTS)
System temperature : +57 °c
VCore : +0.82 V
VCC12 : +11.99 V
VCC3.3 : +3.30 V
VCC5 : +5.08 V
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
CPU temperature(DTS)
Detects and displays the current CPU temperature.
System temperature
Detects and displays the current system temperature.
VCore to VCC5
Detects and displays the output voltages.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
Power Management Configuration
This section is used to configure the power delay settings.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Power On Delay
Enables or disables the Power On Delay function.
Power Off Delay
Enables or disables the Power Off Delay function.
42
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Power Management Configuration settings
Input Voltage 9~36V
Delay Time Setting
Power On Delay [Disable]
Power Off Delay [Disable]
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Power On Delay Setting.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
TPPC 2401/2701/3201 User Manual