Harmar Mobility AL350 Installation & Owner's Manual page 24

Installation
2. Slide Hitch Adapter
into vehicle's hitch
receiver.[Figure 24-1] Fasten
Adapter according to hitch
class.
PINCH PINCH
TUBE TUBE
Presses Hitch Adapter Presses Hitch Adapter
against receiver wall against receiver wall
eliminating rattles, eliminating rattles,
and lift movement and lift movement
24
SECTION 2 : INSTALLER
HHCS, HHCS,
1/2-13 x 3" 1/2-13 x 3"
FULLY THREADED FULLY THREADED
BOLT BOLT
HHCS, HHCS,
1/2-13 x 3-1/2 or 4"" 1/2-13 x 3-1/2 or 4""
1/2" Hex 1/2" Hex
Nyloc Nut Nyloc Nut
C L A S C L A S
S 2 S 2
THREADED HOLE THREADED HOLE
1/2" Hex 1/2" Hex
Nyloc Nut Nyloc Nut
C L A S C L A S
| www.harmar.com | 800-833-0478
Figure 24-1
S 3 S 3