Swing-Away - Harmar Mobility AL350 Installation & Owner's Manual

INSTALLATION WITH SWING-AWAY
OPTIMIZING HITCH HEIGHT
You can vary the lift height by changing the Hitch Adapter's orientation and
location. This helps you optimize the vehicle's ground clearance to ensure
that the platform lays flat on the ground when it reaches the end of its
travel.
Consult Figure 23-1 to select the orientation needed for the vehicle based on
the Hitch Height, that is, the vehicle's hitch receiver distance to the ground.
X X
Figure 23-2
1/2" Hex
Nyloc Nuts
( x3 )
1. Attach Hitch Adapter
to Swing-Away
positioned properly according to the application's Hitch
O R
Height. [Figure 23-2]
Attach Swing-Away to lift. Do NOT over-tighten.
AL350 Hitch-Mounted Scooter and Power Chair Lift
SECTION 2 : INSTALLER
4"-11" 4"-11"
HHCS,
1/2-13 x
3-1/2"
( x3 )
Hardware supplied
in hardware pack
Installation
13"-15"
13"-15"
11"-13" 11"-13"
P/N: 610-00065 Rev A
Figure 23-1
15"-16"
15"-16"
NOTE:
The

Swing-Away

replaces the
hitch post.
NOTE: ONLY
the AL123 or
AL126 can be
safely inverted.
23