Harmar Mobility AL350 Installation & Owner's Manual page 22

Installation
INSTALLING THE HITCH ADAPTER
1. Attach hitch adapter to hitch post
orientated properly according to the
application's Hitch Height. [Figure 22-1]
2. Attach Hitch Post to lift.
over tighten.
3. Slide Hitch Adapter into vehicle's
hitch receiver. Fasten Adapter
according to hitch class. [Figure 22-2]
Figure 22-1
22
SECTION 2 : INSTALLER
Do NOT
| www.harmar.com | 800-833-0478
1/2" Hex
Nyloc Nuts
( x3 )
HHCS,
1/2-13 x
O R
3-1/2"
( x3 )
Hardware supplied
in hardware pack