York Fitness Performance YRK53116A Owner's Manual page 12

STEP 5
Attach the seat (18) & back cushion (17) to the right position on the rear support tube (11)
and fasten with eight allen bolts (24).
STEP 6
The pedals (19 & 20) are marked "L" and "R" - Left and Right.
Connect them to their appropriate crank arms (27) on the main frame (1). The crank right
arm is on the right- hand side of the cycle as you sit on it.
Note : The right pedal should be threaded on clockwise and the left pedal anticlockwise.
Attach the handlebar (12) to the seat post (11) and fasten with two sets of carriage bolt (13),
curved washer (7) and domed nut (8).
Connect the end of middle pulse wire 3 (41) with the lower pulse wire (40).
12