York Fitness Performance YRK53116A Owner's Manual page 10

STEP 3
Turn the tension control knob (16) to level 8 and then connect the tension control cable (16)
with extension tension cable (21).
Connect the end of middle sensor wire (23) with lower sensor wire (22).
Connect the end of middle pulse wire 1 (43) with middle pulse wire (42).
Insert the front support (9) into the main frame (1) and fasten it with four sets of curved
washer (7) and allen bolt (24).
Take down two screws (58) which are pre-assembled on the back of console (10).
Connect the top of middle sensor wire (23) with the sensor wire from the back of console
(10).
Connect the top of middle pulse wire 1 (43) with the pulse wire from the back of console (10).
Attach the console (10) to the front support (9) and fasten it with two screws (58).
10