Advertisement
Modification Required: Please read complete instructions before
proceeding. Location modification required for this installation, proceed with caution.
If you are unsure or feel that the installation is to difficult, we recommend you seek
professional installation. Note that additional installation fees may apply and vary by
location. Scosche is not responsible or liable for any additional fees or modification done
by the installer.
Caution! Before beginning the disassembly make sure of the following:
• Negative battery terminal is disconnected.
• Parking brake is ON.
• Gear shifter is set to a lower gear.
Accessing 12V Power
1. Disassembly preliminary steps:
• Disconnect negative battery terminal.
• Parking brake is ON.
• Gear shifter is set to a lower gear.
2. Removing the shifter knob:
A. Unclip the shifter boot from the
knob.
B. Twist to loosen and unscrew the
shifter knob from location.
3. Removing Lower Tray:
A. Using a panel removal
tool, remove the tray panel
located below the shifter and
cupholders.
B. Remove and retain the exposed
(2) screws securing the shifter
panel.
VEHICLE DISASSEMBLY
4
Advertisement
