Advertisement
TESTING CONNECTION
Before proceeding to the preparation/installation please test the modules func
tionality by connecting the provided vehicle specific t-harness (diagram below).
Once the module is connected, place the Qi-enabled device on the module and
refer to the LED Status chart below for specifics. For technical assistance with the
installation please call or vistt us on the web at:
1-800-383-4490 x1 I www.scosche.com/contact
Nola: The module can also
be tested by connecting it to
a USB to type-c connection
power source (not included).
CONNECTNi UNNERSAL 12-VOLT HARNESS
1. Tap into the vehicles 12-volt power harness using the appropriate tools.
2. Next, color match and clamp connect the Universal power harness to the vehicle's 12V
harness.
3. tt done correcHy, the module wlll llght-up when vehicle Is turned on, and the 12-volt power
socket will retain power.
FOREIGN OBJECT OETECTION: Please follow the MAGICPLATE
2 or 3 for best charging results. Note that blocking the charging coil with anything metallic object
may cause the module to not work as designed.
BATTERY VOLTAGE REQUIREMENTS: The MQUSM (Qi Module) is designed to operate at
voltages between 13.2-14.7. If your vehicle does not supply sufficient voltage with the ignition OFF,
you may need turn the ignition to the ON position in order to operate the MQUSM. For questions
about this product please contact our Scosche tech support team at: (800)
www.scosche.com/contact.
LEO CHARGING STATUS: The LED indicator on the side of the mount
illuminates the charging status of the device. When powered ON, the indicator
blinks in the following order: BLUE, GREEN, BLUE.
Standby = Green
Charging = Blue
TESTING QI MODULE (MQUSM)
���•
Black to Black
12V Harness Ground
• �
•
R�dtoRed
12V Harness Power
™
mounting instruction on pages
6
To Qi Module
(MQUSM)
ext, 1 or
363-4490
Advertisement
