Removing The Plate - Scosche TAQ04 Manual

MAGICPLATE'" MOUNTING OPTION 1
NOTE: For mounting directly to device, use the large single plate with template guide as
shown in the instructions below.
!ave
the white
�
-
- - - - - -
paper backing
from both plates

REMOVING THE PLATE

Use a thin plastic card to carefully lifl the plate's
adhesive surface from the mounting surface.
Slowly lifl up and remove the plate_
Do not use any heat or liquids to remove the
plate, due to risk of damaging your phone.
Contact Scosche Customer Service for any
additional assistance at 800.363.4490 Ext. 1 or
customerservice@scosche.com
MAGICPLATE'" MOUNTING OPTION 2
NOTE: For mounting directly to
template guide as shown below.
0
Remove
the white
e
When
REMOVING THE PLATE
Use a thin plastic card to carefully 11ft the plate's adhesive
surface from the mounting surface. Slowly 11ft up and remove
Do not use any heat or liquids to remove
the plate.
Scosche
CUstomer
Contact
customerservceOscosche.com
,
- - -
- - -
- - -
CASE,
Service any addltlonal assistance at 800.363.4490
for
e
Line up the
corresponding
arrows on the
Template Guide to the to
the bottom of your phone.
e
When positioned,
press plates firmly
to affix and remove
template.
use the (2) small plates with the integrated
e
Line up the
corresponding
arrows on the
Template Guide to the to
the bottom of your phone.
���oned,
press plates
f1rrnly to affix
plate, due to risk of damaging your phone.
the
2
� ,
g:>
g
�
1 or
Ext.