Scosche TAQ04 Manual page 7

For 2015-up toyota camry

Once you have confirmed the modules working status, retrieve the pockeVshifter

panel removed during step 5 of the disassembly process, Next, follow the steps

below in the order shown to ensure the pocket modification is done correctly and

for best fit of the TAQ04 bezel.

CAUTION! DO NOT attempt to drill a hole while the pocket is still mounted to the vehicle.

PREPARATION STEP

Place TAQ04 Direct Fit bezel into

pocket panel

PREPARATION STEP B

Use a contrasting chalk or marker,

estimate and mark the hole location,

then remove Qi-bezel.

PREPARATION STEP C

Carefully make a hole large enough

to pass the USB type-c connector

through.

PREPARATION

Table of Contents