Advertisement
Modification Required: Please read complete instructions before
proceeding. Location modification required for this installation, proceed with
caution. If you are unsure or feel that the installation is to difficult, we recommend
you seek professional installation. Note that additional installation fees may apply
and vary by location. Scosche is not responsible or liable for any additional fees or
modification done by the installer.
Caution! Before beginning the disassembly make sure of the following:
• Negative battery terminal is disconnected.
• Parking brake is ON.
Accessing 12V Power
1. Follow the following steps listed
below on front passenger side, see
corresponding illustration 1 on right.
A. Lift/Open all center console
compartments.
B. Using a panel removal tool,
carefully remove the side-top trim
panel from the center console on
the passenger's side.
C. Remove the (7)
exposed from previous step, and
remove the plastic trim.
2. Keeping the compartments open from
previous step, follow steps below on
driver's side, see illustration 2 on the
right.
D . Using a panel removal tool,
carefully remove the side-top
trim panel from the center
console on the driver's side.
E. Remove the (7)
exposed from previous step,
and remove the plastic trim.
3. Carefully remove the cup-holder trim
panel (Remove the trim panel ONLY,
not the cup-holders).
VEHICLE DISASSEMBLY
screws
ton<
screws
ton<
4
Continue on page 5
Advertisement
