Air Cooling Units, 115 / 230 V Dc; Hipace 60 P, Hipace 80, Splitflow 50; Hipace 300, 400, 700, 800 - Pfeiffer Vacuum HiPace Series Operating Instructions Manual

Air cooling units, 115 / 230 V DC

4 Air cooling units, 115 / 230 V DC
4.1

HiPace 60 P, HiPace 80, SplitFlow 50

4.2

HiPace 300, 400, 700, 800

6
Scope of delivery
● Air cooling unit
● Mounting bracket
● 3 pieces Allen head screw M4x8
● 1 piece countersink screw M5x10
● 3 pieces washer
Mains connection: voltage
Power consumption at 50 Hz
Power consumption at 60 Hz
Electric connection
 Fix mounting bracket 51 with two Allen head screws 52 at the pump bottom part.
 Fix fan housing 15 with Allen head screw 52 at mounting bracket.
A
15
 Fix fan housing at the pump. Depending on the use of rubber feet:
– A: Fixing with one rubber foot 320. Thereby compensate the remaining three rub-
ber feet 320 with a washer 58 each.
– B: Fixing with countersink screw 55 without use of rubber feet.
 The installation of the air cooling unit 115/230 V DC to the turbopump is analogous to
the 24 V DC version of the same pump type.
Netzanschluss
Power consumption at 50 Hz
Power consumption at 50 Hz
Electric connection
PM Z01 343 A
230 V AC
13 W
10 W
field attachable
51
52
320
58
PM Z01 308 A PM Z01 309 A PM Z01 341 A PM Z01 342 A
115 V AC 230 V AC
12 W 13 W
9 W 10 W
field attachable
PM Z01 344 A
115 V AC
12 W
9 W
51
55
B
15
230 V AC 115 V AC
13 W 12 W
10 W 9 W
15
52