Summary of Contents for Pfeiffer Vacuum HIPACE NEO
Page 1
OPERATING INSTRUCTIONS Translation of the Original HIPACE NEO Air cooling with USB connector...
Page 2
These operating instructions describe all models and variants of your product. Note that your product may not be equipped with all features described in this document. Pfeiffer Vacuum constantly adapts its products to the latest state of the art without prior notice. Please take into account that online operating instructions can deviate from the printed operating instructions supplied with your product.
Table of contents Table of contents About this manual Validity 1.1.1 Applicable documents 1.1.2 Variants Target group Conventions 1.3.1 Instructions in the text 1.3.2 Pictographs 1.3.3 Abbreviations 1.3.4 Stickers on the product Safety General safety information Safety precautions Limits of use of the product Proper use Foreseeable misuse Personnel qualification...
Page 4
List of tables List of tables Tbl. 1: Applicable documents Tbl. 2: Abbreviations used in this document Tbl. 3: Stickers on the product Tbl. 4: Permissible ambient and operating conditions Tbl. 5: Parameter settings in the electronic drive unit of the turbopump Tbl.
Page 5
List of figures List of figures Fig. 1: Position of the sticker on the product Fig. 2: Design of air cooling Fig. 3: Connecting air cooling Fig. 4: Dimensions of PM Z01 367 5/16...
Keep the manual for future consultation. 1.1 Validity This operating instructions is a customer document of Pfeiffer Vacuum. The operating instructions de- scribe the functions of the named product and provide the most important information for the safe use of the device. The description is written in accordance with the valid directives. The information in this op- erating instructions refers to the product's current development status.
About this manual Note 1.3.3 Abbreviations Abbreviation Meaning in this document Direct current Width Across Flats Universal Serial Bus Tbl. 2: Abbreviations used in this document 1.3.4 Stickers on the product This section describes all the stickers on the product along with their meanings. Rating plate (example) The rating plate is located on the bottom of the mounting bracket D-35641...
Safety 2 Safety 2.1 General safety information The following 4 risk levels and 1 information level are taken into account in this document. DANGER Immediately pending danger Indicates an immediately pending danger that will result in death or serious injury if not observed. ►...
Tbl. 4: Permissible ambient and operating conditions 2.4 Proper use ► Use the air cooling exclusively for cooling Pfeiffer Vacuum turbopumps within the limits of use de- scribed. ► Adhere to the installation, commissioning, operating, and maintenance instructions. ► Do not use any accessory parts other than those recommended by Pfeiffer Vacuum.
3 Product description 3.1 Function Pfeiffer Vacuum recommends using air cooling in processes with high gas throughput, bad fore-vacuum pressure and/or high ambient temperatures. The air cooling system is connected at the Micro-USB con- nector on the pump bottom part, from where it is supplied with power.
Connecting air cooling 4 Connecting air cooling NOTICE Property damage to the electronics or the sensor Disconnecting the plug-and-socket connection with the voltage supply switched on may lead to the destruction of electronic components. ► Always interrupt the voltage supply before you plug in or unplug the sensor connection cable. Prerequisites ●...
Important settings and function-related variables are programmed ex factory as parameters in the vac- uum pump electronic drive unit. Each parameter has a three-digit number and a description. Parameter- driven operation and control is supported via Pfeiffer Vacuum displays and control units, or externally via RS-485 using Pfeiffer Vacuum protocol.
Technical data and dimensions 6 Technical data and dimensions 6.1 Technical data Type designation Air cooling, shielded Part number PM Z01 367 Pump HiPace 80 Neo | HiPace 30 Neo Electronic drive unit TC 80 Control voltage 24 V DC Electrical connection Micro USB Tbl.
Declaration of conformity Declaration for product(s) of the type: Air cooling HiPace Neo turbopumps We hereby declare that the listed product satisfies all relevant provisions of the following European Directives. Electromagnetic compatibility 2014/30/EU Low voltage 2014/35/EC Restriction of the use of certain hazardous substances 2011/65/EU...
Need help?
Do you have a question about the HIPACE NEO and is the answer not in the manual?
Questions and answers