3DHISTECH Pannoramic SCAN II User Manual page 120

Pannoramic SCAN II 2.2.0 User's Guide
In the Messenger Setup window the following parameters can be set:
•
•
•
•
•
•
•
•
•
– Report sender settings
•
Add new recipients to the list by clicking + or remove selected from the list by clicking -. To
send an example mail to the selected recipient, click
modify recipient data by clicking
January 24, 2020 - Rev. 2
Figure 79 – Messenger Setup window
Message Type – E-mail
Host Address
Port
E-mail
Authentication – User ID and User password are required.
Secure Connection (SSL) – If activated, the messages will be sent through secured
connection.
If you have properly set messenger settings, click Save.
Click Add new user in the Message Call section of the External application call
settings window then enter Display name and Address of the recipient. Select
message functions under the Send Message if: field for the selected recipients
(from the drop-down list at the top of the section).
Click Delete user if you want to remove a user from the list after selection.
.
3DHISTECH Ltd.
. Open E-mail settings window to
5.6.1 Settings
120(156)