Notes Regarding Operational Safety - 3DHISTECH Pannoramic SCAN II User Manual

Pannoramic SCAN II 2.2.0 User's Guide

Notes Regarding Operational Safety

The below section of this User's Guide contains information and warnings of a kind that must be
followed by owner/operator personnel.
Warning and advisory symbols which are used on the base unit of the Pannoramic® SCAN II and in
chapter 1.1.3 Warning and Information Labels have the following meanings:
The Pannoramic® SCAN II, including any of its original accessory components, should not be operated
in any other way than described in chapter 1.1.1 Intended Use.
Any of the following notes should be strictly observed:
Warning!
Caution!
Note:
Warning!
Warning!
Warning!
January 24, 2020 - Rev. 2
CAUTION
Disconnect mains plug before any kind of intervention into the device!
CAUTION
Crush hazard!
If operating the device other than specified by the manufacturer, the level of
safety will decrease.
In the event of any non-conforming type of use, including non-conforming use
of assemblies or single parts, no liability will be assumed by the Manufacturer.
This shall also apply to service or repair work of any kind, which is performed by
other than duly authorized service personnel. All claims for warranty and
warranty services will be null and void in any such case.
The safety level of the equipment after servicing will be identical with level of
the original equipment.
Insert the power cord plugs only into a grounding outlet. The protective action
must not be rendered ineffective by extension cables without protective
conductor. The Pannoramic® SCAN II has a built-in protection which must not be
rendered ineffective by extension cables without protective (earth-ground)
conductor.
Never operate the device in explosion-risk environment.
If protective devices are found to be ineffective, the Pannoramic® SCAN II must
be shut down and precautions must be taken to prevent unintended usage. For
necessary repair work or work to restore proper operating condition, you
should contact the 3DHISTECH Customer Service.
3DHISTECH Ltd.
Notes Regarding Operational Safety
10(156)