Software Description; Starting / Exiting Pannoramic® Scanner Software; Starting The Software - 3DHISTECH Pannoramic SCAN II User Manual

Pannoramic SCAN II 2.2.0 User's Guide

4 Software Description

4.1 Starting / Exiting Pannoramic® Scanner Software

4.1.1 Starting the software

To start the program, double-click on the program icon on the desktop or start it from Start \
Program Files \ 3DHISTECH \ Pannoramic Scanner
After software initialization the user interface is opened and the mode selection icons are displayed.
These three buttons represent Microscope and Planner scanner modes, and the Service mode.
Microscope mode
for digitization of individual slide or individual rack
•
set scanning profile of the slide
•
run Live teleconsultation
•
use Live microscope
•
Planner mode
plan the entire scanning procedure
•
assign one or more profiles to each slide
•
define Brightfield and Fluorescence or mixed scanning mode within a run
•
define scanning profile to slides included in racks or magazines
•
automated scanning mode
•
Service mode
service password
•
camera settings
•
image compensation
•
barcode settings
•
microscope control
•
January 24, 2020 - Rev. 2 3DHISTECH Ltd.
4 Software Description
35(156)