3DHISTECH Pannoramic SCAN II User Manual page 89

Pannoramic SCAN II 2.2.0 User's Guide
Dilate mask
Adjust the slider to enlarge or decrease the scanned area. To switch to manual mode click the top left
corner of the button and the required value can be entered in the box
Preview Toolbar
This section is located at the bottom of the preview image.
Save scanmap
•
Position
•
sample and then click on the area of interest on the preview image. This will define the Live
image that you can access from the Live view
Union
•
shape selected in the Preview Toolbar. This area will not be scanned.
Erase
•
the selected shape from the Preview Toolbar. This area will not be scanned.
January 24, 2020 - Rev. 2
– Click this icon to save the currently selected areas to scanmap.
– To position the specimen holder that holds the current slide, click Position
– Add the selected areas to the preview. Mark area for scanning based on the
– Delete selected areas from the preview image. Deselection is made based on
Figure 47 – Not scanned selection
3DHISTECH Ltd.
5.2.2 Microscope Control Panel
.
.
89(156)