Profile Settings Panel - 3DHISTECH Pannoramic SCAN II User Manual

Pannoramic SCAN II 2.2.0 User's Guide

5.1.1 Profile Settings Panel

Objective settings
This field displays the objective used for scanning.
Objective type
•
20x or 40x
◦
Output resolution
•
Fix values are: 37x Native for 20x objective, and 73x Native for 40x objective.
◦
Focus settings for the scan profile
Limits of the range: You can define focus limits by selecting Limits of the range for focusing.
•
You can set the upper and lower limits by selecting the desired value in the selection boxes.
This is useful if focusing was not targeted on the specimen, but on a spot on the coverslip.
Focus distance: the distance of focal points can be set to create a focus map, based on which
•
the software calculates interpolated focus values (one step in distance means one FOV).
January 24, 2020 - Rev. 2
Figure 19 – Focus settings for scan profile
3DHISTECH Ltd.
5.1.1 Profile Settings Panel
54(156)