3DHISTECH Pannoramic SCAN II User Manual page 67

Pannoramic SCAN II 2.2.0 User's Guide
Crop
•
Place Circle
•
Preview toolbar.
Rectangle tool
•
Ellipse tool
•
Polygon tool
•
double-clicking with the mouse at or near the starting point.
TMA tool
•
selection settings on the following four tabs:
TMA Grid Setting
•
on the preview image. Set grid parameters (row and column numbers) and spot shape (round
or rectangle).
Delete TMA grid by clicking the X at the top right corner, and rotate grid by clicking the icon
at the bottom right corner. Enter the number of rows and columns in the Rows and Columns
fields or select the appropriate values with the arrows.
Enter the distance between two spots on the X and the Y axis in µm in the Core distance
fields or select the appropriate values with the arrows. Enter the average diameter of the
spots in the Core size field or select the appropriate value with the arrows.
Clear scanmap
•
January 24, 2020 - Rev. 2
: Crop the area of the selected area.
: You can select the area to be scanned with the different tools on the
: Draw rectangle shaped area.
: Draw ellipse selection.
: Area selection by defining a polygon shape. Finish area selection by
: TMA tool is used for selecting TMA spots on TMA slides. You can set the
: This function is enabled only if a TMA grid has already been placed
Figure 29 – TMA tool: Grid selector
: The entire scanmap area will be cleared and reset to default.
3DHISTECH Ltd.
5.1.2 Microscope Control Panel
67(156)