Notes Regarding Operational Safety - 3DHISTECH Pannoramic 1000 User Manual

Pannoramic 1000 3.0.2 – User's Guide

Notes Regarding Operational Safety

The below section of this User's Guide contains information and warnings of a kind that must be
followed by owner/operator personnel.
Warning and advisory symbols which are used on the base unit of the Pannoramic® 1000 and in the
chapter 2 Warning and Information Labels have the following meanings:
The Pannoramic® 1000, including any of its original accessory components, should not be operated in
any other way than described in chapter
Any of the following notes should be strictly observed:
Warning!
Caution!
Warning!
Warning!
Warning!
Warning!
Warning!
Sep 9, 2020 – Rev. 1
CAUTION
Disconnect mains plug before any kind of intervention into the device!
CAUTION
Crush hazard!
1.1.1 Intended
If operating the device other than specified by the manufacturer, the level of
safety will decrease.
In the event of any non-conforming type of use, including non-conforming use
of assemblies or single parts, no liability will be assumed by the Manufacturer.
This shall also apply to service or repair work of any kind, which is performed by
other than authorized service personnel. All claims for warranty and warranty
services will be null and void in any such case.
Use of this instrument in a dry environment, especially if synthetic materials are
present (synthetic clothing, carpets, etc.) may cause damaging electrostatic
discharges that may cause erroneous results.
Insert the power cord plugs only into a grounding outlet. The protective action
must not be rendered ineffective by extension cables without protective
conductor. The Pannoramic® 1000 has a built-in protection which must not be
rendered ineffective by extension cables without protective (earth-ground)
conductor.
The operation of the instrument in explosion-risk environments is not allowed.
If protective devices are found to be ineffective, the Pannoramic® 1000 must be
shut down and precautions must be taken to prevent unintended usage. For
necessary repair work or work to restore proper operating condition, you
should contact the 3DHISTECH Customer Service.
Check that your local line voltage is compatible with Pannoramic® 1000
specifications before you turn power on.
3DHISTECH Ltd.
Use.
8(74)