Table of Contents
Advertisement
PANNORAMIC® DESK FLASH DX
3 Operational Safety
Safety Instructions
The below chapter of this Instructions for Use contains information and warnings of a kind
that must be followed by owner/operator personnel to maintain the safe use and solid
performance of the device.
The Pannoramic® DESK FLASH DX, including any of its original accessory components, should
not be operated in any other way than described in chapter Intended Use. Any of the following
notes and warning symbols used on the Pannoramic® DESK FLASH DX must be strictly
observed:
Warning!
Image quality and performance
It is strictly prohibited to operate the device other than specified by the manufacturer;
otherwise, if operating the device by not observing warnings, cautions and instructions, the
level of safety, the quality of the acquired image, and the performance of the Scanner will
decrease.
Warning!
Maintenance and Errors
If any part of the Scanner is found or likely to be defective or maladjusted, it is forbidden to
use the Scanner until the necessary repairs have been made, otherwise, operating the
Scanner with defective or misaligned components can cause fatal or other serious personal
injury or lead to clinical misdiagnosis or mistreatment.
Warning!
Safety awareness
The Scanner can be operated only if you have read, and understood all of the safety
information, safety procedures, and emergency procedures detailed in this section. Using
the Scanner without proper knowledge of its safe use can result in death or other serious
personal injury, and can also lead to clinical misdiagnosis or mistreatment.
INFORMATION FOR USE – FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
OPERATIONAL SAFETY
13
Advertisement
Table of Contents
